Best Whole House Water Filter
With the increase of air and ground pollution and the atrocities of toxic wastes being dumped in our reservoirs and other water sources, it should be no surprise to you that our drinking water is constantly in danger of being contaminated. Whole house water filters are an all-in-one viable solution to eliminating harmful bacteria, and purifying your water.
What is a whole house water filter?
Just as it’s name suggest a whole house water filter is used to purify the water for your entire house. This type of water filter is connected to the main waterline in your house therefore dispensing clean water anywhere in the house. This includes showers, toilets, water faucets, kitchen, and baths.
Determining the type of whole house water filter system you will need will depends solely on the type of contaminants found in your water supply.
The cost of buying a home water filtration system can be quite expensive if your on a tight budget. However compared to purchasing several single water filters for every faucet in the house, a whole house water filter system is the much more viable cheaper solution over time. They should also be changed periodically to provide maximum protection. Whole house water filter price range can run you anywhere from 15 to almost 2000 dollars.
How often should you change your filter?
Manufacturers recommend changing water filters every 2 to 6 months, however with that being said you should replace them whenever you notice a decline in performance. This could be lost water pressure, strange taste or decrease flow rate. Water filters used in whole house or reverse osmosis systems, should be changed every two months or 8,000 gallons of water.
How often you should change your water filter depends on how much water you and your family use on a daily basis. If you have a large family who consumes many gallons of water, and washes large baskets of clothes weekly and takes regular showers daily then your looking at replacing your filters very frequently.
What types of common water contaminants you should look for?
Sediments – are known to be to visible particles in the water which need to be mechanically strained out, this would include sand, dust, rust and dirt. Water supplies that harbor a huge amount of sediments should be put through multiple stages of sediment filtering.
Iron – ferrous (aka dissolved or clear water iron) and ferric (aka rust or red water iron) are the two types of iron that are usually found in water supplies. Clear water iron can be eliminated with ion or oxidation exchange. Sediment filters are capable of removing rust particles, and red water iron.
Chemicals – Chlorine is the most common chemical disinfectant found in municipal water supplies, and can be removed with a carbon water filter.
Two main types of whole house water filter systems:
#1. Heavy duty filtration system
This contaminant removal system performs at the highest level due to the WholeHouseFilterfact that it uses large amounts of filter media. The media is placed in a tank that stands about 2 feet 10″ tall and provides iron protection for 5-10 years it’s replacement schedule. Compact single tank system connects to the main water supply line of the house.
#2. Standard capacity water cartridge
These water filter cartridges are placed inside durable filter housings to treat the polluted water throughout the entire home. The filters are usually 4.5”D by 10” or 20”H and are placed at the main water line.These capacity systems are standard and affordable, however they do require more maintenance because these filters should be changed out frequently.
If you want the best and highest performing contaminant removal system look for heavy duty filtration systems and for standard capacity filtration, look for affordable whole house water filter systems.